Vortek Rivet Nut Tool
Vortek Rivet Nut Tool
This offer is for limited time only! Buy before price increase.
BUNDLE & SAVE
Couldn't load pickup availability
Drill the Hole. Insert the Nut.
Pull. Done.
The Vortek Rivet Nut Tool sets threaded inserts into thin panels, brackets, and sheet metal — giving you a strong, reusable threaded fixing point in material that’s too thin to tap, without welding a nut on the back.
✓ Interchangeable mandrels for different rivet nut sizes
✓ Manual compression — stop once the insert is securely set, do not over-compress
✓ Hole size must match the insert — confirm before drilling
Thin material. No thread.
No access to the back of the panel.
Drilling and tapping doesn’t work on thin sheet metal — there’s not enough material for a thread to hold. Welding a nut on the back requires access you often don’t have. Rivet nuts solve both problems: drill a hole from the front, insert the rivet nut, compress it with the tool, and you have a strong, reusable threaded fixing point — no access to the back required.
Three steps.
One solid threaded insert.
1. Drill the Hole
Drill a hole in the panel or bracket to the correct diameter for the rivet nut size you’re using. Confirm the hole size before drilling.
2. Insert and Position
Thread the rivet nut onto the correct mandrel, insert it into the hole, and position the tool squarely against the panel surface.
3. Compress and Set
Operate the tool to compress the rivet nut and set it in the panel. Stop as soon as the insert is secure — over-compression can strip the mandrel or damage the insert.
The details that
matter.
| Product Type | Manual rivet nut installation tool |
|---|---|
| Primary Use | Setting threaded inserts in thin panels, brackets, and sheet metal |
| Mandrel Sizes | As shown or marked in the supplied set — confirm sizes before ordering |
| Hole Preparation | Hole diameter must match the selected rivet nut size exactly |
| Operation | Manual controlled compression — stop once the insert is securely set |
| What’s Included | As shown in product images — confirm mandrel sizes and contents before purchase |
Useful wherever you need
a thread in thin material.
Custom Brackets
Add threaded fixing points to fabricated steel or aluminium brackets without welding nuts or tapping thin material.
Panel and Trim Work
Set inserts in body panels and trim pieces for clean, reusable threaded fixings without access to the back of the panel.
Automotive Fabrication
Install threaded inserts for custom mounts, accessories, and repair work on compatible vehicle panels and brackets.
General Workshop Use
Any application where thin material needs a strong, reusable threaded fixing point that drilling and tapping can’t provide.
Built for fabricators, panel workers,
and automotive DIYers.
Whether you’re fabricating a custom bracket, doing panel and trim work, or adding a threaded fixing point to a vehicle panel — the Vortek Rivet Nut Tool gives you a fast, clean way to install threaded inserts without welding or tapping. Confirm mandrel sizes and hole dimensions before starting.
What customers love
about it.
“Used this to add threaded inserts to a custom bracket I was fabricating. Once I had the right mandrel fitted it set the nuts cleanly every time. Much neater than welding a nut on and a lot quicker.”
Parow, Western Cape · Verified Purchase
“Good tool, does what it says. First couple of inserts I over-tightened slightly before I got the feel for it. After that it was consistent. The mandrel range covers most of what you’d need for general work.”
Boksburg, Gauteng · Verified Purchase
“I do a lot of panel and trim work and this has saved me a lot of time. Sets inserts quickly and the results are solid. Beats drilling and tapping by a long way for thin material.”
Randburg, Gauteng · Verified Purchase
Everything you need
to know.
What rivet nut sizes does it support?
What happens if I use the wrong mandrel?
How do I know when the insert is fully set?
What if the insert spins in the hole?
Can it be used for structural vehicle repairs?
How do I maintain the mandrels?
Drill. Insert. Compress.
Strong threaded fixing. Done.
Manual rivet nut installation for panels, brackets, and fabrication work. Confirm mandrel sizes before ordering.
