Vortek 10-Piece Bearing Race & Seal Driver Set
Vortek 10-Piece Bearing Race & Seal Driver Set
This offer is for limited time only! Buy before price increase.
BUNDLE & SAVE
Couldn't load pickup availability
Press Bearing Races and Seals In Straight. Every Time.
A bearing race or seal driven in at an angle will fail early and take other components with it. This 10-piece driver set gives you the right collar for the job, so you can press races and seals in squarely and to the correct depth — without a hydraulic press and without improvising.
- ✓ 9 collar sizes from 39mm to 81mm — covers most standard bearing races and seals
- ✓ Single knurled driver works with all 9 collars — one tool, full kit
- ✓ Chrome-plated steel collars — sized and stamped for quick identification
Why Improvising This Job Costs You
Using a socket or a piece of pipe to drive a bearing race or seal is a gamble. If the collar isn't the right diameter, the force goes onto the wrong part of the race — distorting it, damaging the housing, or driving it in crooked. A crooked seal leaks immediately. A distorted race causes premature bearing failure. The right collar eliminates all of that.
Match the Collar. Drive It Home.
Select the collar that matches your bearing race or seal outer diameter, place it over the component, and drive it in with the included knurled driver and a hammer. The collar contacts the correct face of the race or seal and drives it in squarely and evenly to the correct depth. No guessing, no rocking, no damage.
Why It Works
39mm, 44.5mm, 50mm, 59mm, 63mm, 65.5mm, 72mm, 76mm, and 81mm — covers the most commonly needed dimensions for standard races and seals.
The collar contacts the full face of the race or seal, so it can't tilt or cock as it seats into the housing.
Each collar is clearly marked with its diameter so you're not measuring and guessing between jobs.
The driver and collar work with a standard hammer — no hydraulic press or specialist equipment needed.
Features & Specifications
- 10-piece set: 9 collars + 1 knurled driver
- Collar sizes: 39mm, 44.5mm, 50mm, 59mm, 63mm, 65.5mm, 72mm, 76mm, 81mm
- Material: Chrome-plated steel
- Size stamped on each collar for quick identification
- Driver: Knurled steel, compatible with all 9 collars
- Includes blue hard carry case with moulded insert
When You'll Use This
- Installing wheel bearing races into hubs or housings
- Pressing oil and grease seals into gearboxes, differentials, and axle housings
- Engine rebuilds requiring seal and race installation
- Any job where a bearing race or seal needs to be driven in squarely
Who It's For
- Home mechanics doing wheel bearing and hub work
- Workshop technicians who want a dedicated driver set rather than improvising with sockets
- Anyone doing engine or drivetrain rebuilds that involve seal installation
What's in the Box
- 9 × Chrome-plated steel collars (39mm, 44.5mm, 50mm, 59mm, 63mm, 65.5mm, 72mm, 76mm, 81mm)
- 1 × Knurled steel driver
- 1 × Blue hard carry case with moulded insert
- 1 × Vortek gift box
Compatibility
Suitable for standard bearing races and seals with outer diameters between 39mm and 81mm. Check your bearing race or seal outer diameter against the collar sizes before use. Works on most passenger vehicles, bakkies, and light commercial vehicles.
What customers love about it.
"Used this to install the wheel bearing races on my Fortuner after a hub replacement. Found the right collar immediately, drove them in perfectly straight. No leaks, no noise. Exactly what I needed."
"Good quality set. The sizes are clearly stamped which makes it easy to grab the right one quickly. The case keeps everything organised. Would've liked one more size for a specific gearbox seal but for most jobs it's covered."
"This is now a permanent fixture in the workshop. We use it on almost every bearing and seal job. Saves time and we stopped having comebacks from seals that were driven in crooked. Worth every cent."
Frequently Asked Questions
39mm, 44.5mm, 50mm, 59mm, 63mm, 65.5mm, 72mm, 76mm, and 81mm. Check your bearing race or seal outer diameter before selecting a collar.
No — the driver and collar work with a standard hammer. No press or specialist equipment required.
Yes — the collars are designed for both bearing races and seals. Select the collar that matches the outer diameter of the component you're installing.
Measure the outer diameter of your bearing race or seal and match it to the closest collar size. Each collar is stamped with its diameter for quick identification.
The Right Collar Makes the Difference.
A bearing race or seal driven in straight lasts the life of the component. One driven in crooked fails early and takes other parts with it. Add the Vortek 10-Piece Bearing Race & Seal Driver Set to your kit and get it right the first time.
